Graco Reactor 2 E-30 Proportioner Package (Part #272010) 10 kW, 230/400V
Graco Reactor 2 E-30 Spray Foam Proportioner
The Graco Reactor 2 E-30 (272010) is an electric, high-pressure plural-component proportioner package designed for spray foam applications. With advanced control modules and Reactor Connect capability, it helps optimize spray parameters, reduce downtime, and support consistent performance on the job.
Key Features:
- Advanced Controls & Connectivity: Reactor Connect enables monitoring, troubleshooting, and spray-parameter optimization using real-time data
- High-Pressure Performance: Up to 2000 psi (13.8 MPa / 138 bar) maximum working pressure for demanding spray foam work
- Powerful Heating: 10 kW system with maximum fluid temperature up to 190°F (88°C)
- Compact, Service-Friendly Design: Compact footprint and ergonomic layout for easier access and servicing
- Built for Plural Components: Two-component system with 1:1 mix ratio capability for polyurethane foam applications
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Manufacturer Part Number | 272010 |
| Series | E-30 |
| Model | Reactor 2 |
| Type | Proportioner Package |
| Product Series | Non-Elite |
| Application | Spray Foam |
| Power Source | Electric |
| Pressure Type | High Pressure |
| Component Type | Two Component |
| Material Application | Polyurethane Foam |
| Compatible Material | Plural Components |
| Flush Type | Solvent |
| Applicator Type | Manual |
| Maximum Mix Ratio | 1:1 |
| Gun Type | No Gun |
| Hose Package | No Hose |
| Maximum Flow Rate | 30 lb/min (13.61 kg/min) |
| Maximum Fluid Temperature | 190°F (88°C) |
| Maximum Hose Length | 310 ft (94.5 m) |
| Maximum Working Pressure | 2000 psi (13.8 MPa / 138 bar / 13800 kPa) |
| Power Rating | 10 kW (10200 W; 13.68 hp) |
| Voltage | 230 V, 400 V |
| Frequency | 50/60 Hz |
| Amperage | 34 A @ 350–415 V AC (3-Phase WYE); 50 A @ 200–240 V AC (3-Phase Delta); 78 A @ 200–240 V AC (1-Phase) |
| Overall Dimensions (W x H x D) | 26.3 in x 63 in x 15 in (66.8 cm x 160 cm x 38.1 cm) |
| Weight | 355 lb (161 kg) |
| Resin Inlet Size | 3/4 in (19.05 mm) |
| Resin Inlet Thread Type | NPSM |
| Resin Inlet Thread Gender | Female |
| Sound Pressure Level | 87.3 dB(A) |
| Wetted Materials | Aluminum; Stainless Steel; Zinc-Plated Carbon Steel; Brass; Carbide; Chrome; Chemically Resistant O-Rings; PTFE; UHMWPE |
Frequently Asked Questions (FAQ):
Q: What is this proportioner used for?
A: It’s designed for spray foam applications and supports polyurethane foam / plural-component materials.
Q: What power does it require?
A: It operates on electric power and supports 230V or 400V, 50/60 Hz, with 1-phase or 3-phase configurations depending on setup.
Q: What are the maximum pressure and temperature ratings?
A: Maximum working pressure is 2000 psi, and maximum fluid temperature is 190°F (88°C).
Q: Does it include a spray gun or hose package?
A: This configuration lists no gun and no hose package.
Q: How much material can it output?
A: Maximum flow rate is 30 lb/min (13.61 kg/min).
Precision power for flawless foam finishes
There’s a quiet kind of luxury in work that’s controlled, consistent, and beautifully efficient—and this proportioner delivers exactly that. The streamlined, compact silhouette hides serious power, pairing high-pressure performance with intelligent controls that let you fine-tune every pass. Style it into a well-organized spray rig with clean cable runs and clearly labeled zones for a studio-like workflow. It’s the behind-the-scenes essential that makes elevated, professional results feel effortless.
Upgrade your spray foam operation with the Graco Reactor 2 E-30 (272010) to optimize performance, reduce downtime, and keep every job running smoothly.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Graco Reactor 2 E-30 Proportioner Package (Part #272010) 10 kW, 230/400V
Graco Reactor 2 E-30 Proportioner Package (Part #272010) 10 kW, 230/400V
Graco Reactor 2 E-30 Spray Foam Proportioner
The Graco Reactor 2 E-30 (272010) is an electric, high-pressure plural-component proportioner package designed for spray foam applications. With advanced control modules and Reactor Connect capability, it helps optimize spray parameters, reduce downtime, and support consistent performance on the job.
Key Features:
- Advanced Controls & Connectivity: Reactor Connect enables monitoring, troubleshooting, and spray-parameter optimization using real-time data
- High-Pressure Performance: Up to 2000 psi (13.8 MPa / 138 bar) maximum working pressure for demanding spray foam work
- Powerful Heating: 10 kW system with maximum fluid temperature up to 190°F (88°C)
- Compact, Service-Friendly Design: Compact footprint and ergonomic layout for easier access and servicing
- Built for Plural Components: Two-component system with 1:1 mix ratio capability for polyurethane foam applications
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Manufacturer Part Number | 272010 |
| Series | E-30 |
| Model | Reactor 2 |
| Type | Proportioner Package |
| Product Series | Non-Elite |
| Application | Spray Foam |
| Power Source | Electric |
| Pressure Type | High Pressure |
| Component Type | Two Component |
| Material Application | Polyurethane Foam |
| Compatible Material | Plural Components |
| Flush Type | Solvent |
| Applicator Type | Manual |
| Maximum Mix Ratio | 1:1 |
| Gun Type | No Gun |
| Hose Package | No Hose |
| Maximum Flow Rate | 30 lb/min (13.61 kg/min) |
| Maximum Fluid Temperature | 190°F (88°C) |
| Maximum Hose Length | 310 ft (94.5 m) |
| Maximum Working Pressure | 2000 psi (13.8 MPa / 138 bar / 13800 kPa) |
| Power Rating | 10 kW (10200 W; 13.68 hp) |
| Voltage | 230 V, 400 V |
| Frequency | 50/60 Hz |
| Amperage | 34 A @ 350–415 V AC (3-Phase WYE); 50 A @ 200–240 V AC (3-Phase Delta); 78 A @ 200–240 V AC (1-Phase) |
| Overall Dimensions (W x H x D) | 26.3 in x 63 in x 15 in (66.8 cm x 160 cm x 38.1 cm) |
| Weight | 355 lb (161 kg) |
| Resin Inlet Size | 3/4 in (19.05 mm) |
| Resin Inlet Thread Type | NPSM |
| Resin Inlet Thread Gender | Female |
| Sound Pressure Level | 87.3 dB(A) |
| Wetted Materials | Aluminum; Stainless Steel; Zinc-Plated Carbon Steel; Brass; Carbide; Chrome; Chemically Resistant O-Rings; PTFE; UHMWPE |
Frequently Asked Questions (FAQ):
Q: What is this proportioner used for?
A: It’s designed for spray foam applications and supports polyurethane foam / plural-component materials.
Q: What power does it require?
A: It operates on electric power and supports 230V or 400V, 50/60 Hz, with 1-phase or 3-phase configurations depending on setup.
Q: What are the maximum pressure and temperature ratings?
A: Maximum working pressure is 2000 psi, and maximum fluid temperature is 190°F (88°C).
Q: Does it include a spray gun or hose package?
A: This configuration lists no gun and no hose package.
Q: How much material can it output?
A: Maximum flow rate is 30 lb/min (13.61 kg/min).
Precision power for flawless foam finishes
There’s a quiet kind of luxury in work that’s controlled, consistent, and beautifully efficient—and this proportioner delivers exactly that. The streamlined, compact silhouette hides serious power, pairing high-pressure performance with intelligent controls that let you fine-tune every pass. Style it into a well-organized spray rig with clean cable runs and clearly labeled zones for a studio-like workflow. It’s the behind-the-scenes essential that makes elevated, professional results feel effortless.
Upgrade your spray foam operation with the Graco Reactor 2 E-30 (272010) to optimize performance, reduce downtime, and keep every job running smoothly.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Graco Reactor 2 E-30 Spray Foam Proportioner
The Graco Reactor 2 E-30 (272010) is an electric, high-pressure plural-component proportioner package designed for spray foam applications. With advanced control modules and Reactor Connect capability, it helps optimize spray parameters, reduce downtime, and support consistent performance on the job.
Key Features:
- Advanced Controls & Connectivity: Reactor Connect enables monitoring, troubleshooting, and spray-parameter optimization using real-time data
- High-Pressure Performance: Up to 2000 psi (13.8 MPa / 138 bar) maximum working pressure for demanding spray foam work
- Powerful Heating: 10 kW system with maximum fluid temperature up to 190°F (88°C)
- Compact, Service-Friendly Design: Compact footprint and ergonomic layout for easier access and servicing
- Built for Plural Components: Two-component system with 1:1 mix ratio capability for polyurethane foam applications
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Manufacturer Part Number | 272010 |
| Series | E-30 |
| Model | Reactor 2 |
| Type | Proportioner Package |
| Product Series | Non-Elite |
| Application | Spray Foam |
| Power Source | Electric |
| Pressure Type | High Pressure |
| Component Type | Two Component |
| Material Application | Polyurethane Foam |
| Compatible Material | Plural Components |
| Flush Type | Solvent |
| Applicator Type | Manual |
| Maximum Mix Ratio | 1:1 |
| Gun Type | No Gun |
| Hose Package | No Hose |
| Maximum Flow Rate | 30 lb/min (13.61 kg/min) |
| Maximum Fluid Temperature | 190°F (88°C) |
| Maximum Hose Length | 310 ft (94.5 m) |
| Maximum Working Pressure | 2000 psi (13.8 MPa / 138 bar / 13800 kPa) |
| Power Rating | 10 kW (10200 W; 13.68 hp) |
| Voltage | 230 V, 400 V |
| Frequency | 50/60 Hz |
| Amperage | 34 A @ 350–415 V AC (3-Phase WYE); 50 A @ 200–240 V AC (3-Phase Delta); 78 A @ 200–240 V AC (1-Phase) |
| Overall Dimensions (W x H x D) | 26.3 in x 63 in x 15 in (66.8 cm x 160 cm x 38.1 cm) |
| Weight | 355 lb (161 kg) |
| Resin Inlet Size | 3/4 in (19.05 mm) |
| Resin Inlet Thread Type | NPSM |
| Resin Inlet Thread Gender | Female |
| Sound Pressure Level | 87.3 dB(A) |
| Wetted Materials | Aluminum; Stainless Steel; Zinc-Plated Carbon Steel; Brass; Carbide; Chrome; Chemically Resistant O-Rings; PTFE; UHMWPE |
Frequently Asked Questions (FAQ):
Q: What is this proportioner used for?
A: It’s designed for spray foam applications and supports polyurethane foam / plural-component materials.
Q: What power does it require?
A: It operates on electric power and supports 230V or 400V, 50/60 Hz, with 1-phase or 3-phase configurations depending on setup.
Q: What are the maximum pressure and temperature ratings?
A: Maximum working pressure is 2000 psi, and maximum fluid temperature is 190°F (88°C).
Q: Does it include a spray gun or hose package?
A: This configuration lists no gun and no hose package.
Q: How much material can it output?
A: Maximum flow rate is 30 lb/min (13.61 kg/min).
Precision power for flawless foam finishes
There’s a quiet kind of luxury in work that’s controlled, consistent, and beautifully efficient—and this proportioner delivers exactly that. The streamlined, compact silhouette hides serious power, pairing high-pressure performance with intelligent controls that let you fine-tune every pass. Style it into a well-organized spray rig with clean cable runs and clearly labeled zones for a studio-like workflow. It’s the behind-the-scenes essential that makes elevated, professional results feel effortless.
Upgrade your spray foam operation with the Graco Reactor 2 E-30 (272010) to optimize performance, reduce downtime, and keep every job running smoothly.
